结合Protos過程分析系统和SensoGate或Ceramat傳感器閘門，Unical為完整的pH測量自動過程控制系统提供理想的功能。 即使在困難的工藝條件下，例如高壓、高溫和高染值水平，它也能獲得高度精確的測量结果。 該系統可以按著工藝流程安裝在危險區域中。

最高的測量點可用性： 校準無需中斷生產過程，甚至可以在直接测量壓力容器時進行校準
由於校準時不需要移除電極，因此生產過程可以不中斷。 支持在壓力容器或主管道中直接進行無故障測量。 不需要複雜且可鎖定的旁路，而且可提高精度。

低維護
按照用戶定義的間隔全自動執行傳感器校準，生產過程不中斷。 兩種緩沖液自動泵入校準腔。 只有緩沖瓶需要再填充。

高性價比
低磨損且低維護泵，缓冲液消耗量極低。

傳感器在危險生產過程中亦具有長使用壽命
在腐蝕性介質或高溫下測量時，傳感器停留在校準腔中，僅短暂地移入工藝流程中進行測量。 這種方法能夠顯著延長傳感器壽命。

即使在重度污染的介質中也能安全輕鬆地測量
按照用戶定義的間隔清潔和清洗傳感器。 清潔液和水自動泵入校準腔。 無需移除並手動清潔傳感器。

區分校準與調整
允許您在運行過程中檢查傳感器數據。 調整僅在與校準值發生預設的偏移時執行。 细微校準散亂引起的測量值恆定偏移會被忽略。

 

集成現代現場總線
與PROFIBUS PA或Foundation Fieldbus的接口允許將Unical系统直接集成到現場總線網絡中。 當然，這同樣適用於危險區域。

對伸缩式連接件具有普遍適應性
Unical系统的模塊式結構支持使用任何伸缩式連接件。 利用Ceramat和Sensogate傳感器閘門可實現最佳功能。

乾淨且安全的構造
平穩、安全、低維護操作所需的全部功能均為標配： 带警報的水壓計和檢修開關、實際閘門位置的反饋、空氣過濾器以及聚水器。 外殼中提供带警報的浸水傳感器。

In combination with the Protos process analysis system and a SensoGate or Ceramat sensor lock-gate, Uniclean provides the ideal functionality of a complete system for automatic process control of a pH measurement.

Maximum availability of the point of measurement: Cleaning without disrupting the process, even when measuring directly in the pressure vessel
Since the electrode is not removed for cleaning, the process can continue uninterrupted. This allows problem-free measurements directly in a pressure vessel or in the main pipe. Elaborate and lockable bypasses are eliminated and accuracy increases.

Low maintenance
Fully automatic sensor cleaning with water or special cleaning solution in user-defined intervals without interrupting the process. The cleaning solution is automatically pumped into the cleaning chamber. Only the containers need to be refilled.

Cost-effective
Low-wear and low-maintenance pumps with extremely low consumption of cleaning agent.

Long sensor life also in critical processes
When measuring in aggressive media or at high process temperatures, the sensor rests in the cleaning chamber and is only briefly moved into the process for measurement. The cleaning chamber may be filled with water. This method increases the sensor life significantly.

 

Safe and easy measurement even in strongly polluted media
Sensor cleaning and rinsing is performed at user-defined intervals. Cleaning solution and water are automatically pumped into the rinsing chamber. Dismantling and manual cleaning of the sensor are omitted.

Modern fieldbus integration
The interfaces to PROFIBUS PA or Foundation Fieldbus allow the Uniclean system to be integrated directly in a fieldbus network. Naturally also in hazardous locations.

Universal adaptation to retractable fittings
The modular structure of the Uniclean system allows any retractable fittings to be used. Optimum functionality is achieved with the Ceramat and SensoGate sensor lock-gates.

Highly accurate measurements
The Uniclean 900 system allows highly accurate measurements to be taken even under difficult process conditions such as high pressure, high temperatures, and high levels of impurities. The device can be installed next to the process, within the hazardous area. Control is via the Protos 3400 measuring system or directly via a PLC.

Clean and safe construction
All features for smooth, safe, and low-maintenance operation are included as standard: Water pressure gauge, air filter and water trap, flooding sensor in the housing with alert message.