有立國際股份有限公司

ISO 9705, IMO FTPC PART 1 大型熱釋放檢測系統 ISO 9705, IMO FTPC PART 10

ISO 9705, IMO FTPC PART 1

大型熱釋放檢測系統 ISO 9705, IMO FTPC PART 10

Large Scale Heat Release System – O2/CO2 ISO 9705, IMO FTPC PART 10

廠牌:代理
供應商:大台北尖端儀器有限公司
聯絡電話:02-2531-0981
定價:與我們聯絡

快速詢價

32

行動條碼QR Code
大型熱釋放檢測系統 ISO 9705, IMO FTPC PART 10-行動條碼QR Code

大型放熱系統– O2 / CO2
ISO 9705,IMO FTPC第10部分

大型和小型氧氣消耗量計使用相同的分析儀和氣體採樣設備對氧氣和CO / CO2測量進行定量分析。量熱計RIG的氧氣消耗量熱分析儀和氣體採樣設備(包括高容量泵和過濾裝置)位於一個單獨的外殼中,可以很容易地與A分離。透過雙重分析量熱儀功能,分析儀外殼可以同時用於錐形量熱儀(ISO 5660)和大量熱儀(ISO 9705)。

對於大規模測試,分析儀外殼與圓錐設備斷開連接,並可以輕鬆地在安裝的腳輪上移動到大型量熱儀的新位置,在此將其連接到大型量熱儀的電源和採樣線。

RIG的量測:–
放熱率(kW / m2)
 有效燃燒熱(MJ / kg)
 點火時間
 煙密度
 一氧化碳生產
 二氧化碳生產

規格與功能
熱量校準
• 用於燃燒純甲烷的校準燃燒器,以校準放熱測量(確定C因子)
• 校準的質量流量控制器用於控制氣體流量
• 計算機控制和校準程序
• 計算機自動調節氣流至用戶設定的能量水平。

氣體採樣分析系統
• 氣體採樣環和氣體採樣管線由不銹鋼或特氟龍製成
• 煙塵過濾器
• 吸收劑
• 流量控制
• 樣品泵
• 冷阱可去除多餘的水分
• 高品質氣體分析儀:

氧氣分析儀
• 順磁性
• 0 – 25%O2範圍
• 壓力補償
• 控制溫度
• <100 ppm的噪音和漂移(按標準)
• 計算機校正和縮放

可選的氣體分析儀:

二氧化碳分析儀
• NDIR類型
• 0 – 10%CO2範圍
• 計算機校正和縮放

一氧化碳分析儀
• NDIR類型
• 0 – 1%CO範圍
• 計算機校正和縮放

技術數據和要求
軟體
• 使用獨特和專有的自動校準技術對儀器進行校正,從而消除了對操作員進行繁瑣而精確的分析設備調整的依賴。
• 該軟體與Microsoft(MS)Windows相容。
• 用戶界面使用標準的Microsoft用戶界面邏輯和樣式,以易於使用和熟悉,以簡化校正和測試操作。
• 用戶友善的下拉選單和標籤顯示儀器狀態,校準和測試進度。
• 快速數據採集掃描–每秒至少4次掃描(每次掃描250毫秒)的速度收集和記錄測試數據;例如100秒測試包含400個測試數據掃描。
• 實時顯示螢幕顯示連續的儀器狀態
• 除了標準操作和測試數據收集所需的通道外,用戶至少可以使用6個模擬輸入頻道,以將自定義縮放數據頻道或事件存儲在測試文件中。
• 測試過程中實時顯示測試數據
• 實時測試數據被收集並存儲在Microsoft Excel中進行分析。
• 使用Microsoft Excel中預編程的MS Visual Basic for Applications(VBA)marcos 來完成標準計算,以將結果顯示為格式化的報告和圖形。
• 該軟體隨附了根據ASTM 1354和ISO 5660第1部分和第2部分 Marcos 創建的報告和圖形。
• 使用Microsoft Excel marco 編輯器和/或MS VBA編輯器的用戶可以輕鬆自定義預編程的格式化報告,從而創建:
  ◦ 數據的非標準計算
  ◦ 專業或自定義報告
  ◦ 專用圖或自定義圖

• 測試數據可以傳輸到任何能夠接受MS Excel文件數據的數據庫和SPC程序。

數據採集硬體–(最小需求)
• 數據採集接口,帶隔離數字輸入,隔離數字輸出,模擬輸入/輸出頻道,16位模擬輸入通道分辨率,16位模擬輸出頻道分辨率
• 快速數據採集掃描–每秒至少4次掃描(每次掃描250毫秒)的速度收集和記錄測試數據;例如100秒測試包含400個測試數據掃描。
• Intel Pentium 4處理器,2.20 GHz系統時鐘速度
• 266 MHz時為256 MB DDR SDRAM
• 靜音鍵盤
• 15英寸平板彩色顯示器
• 80 GB 7200 RPM硬碟驅動器
• 48X CD-ROM驅動器
• 2鍵滾動滑鼠
• 整合的10/100乙太網路
• 56K數據/傳真數據機
• Microsoft WINDOWS 7 Professional操作系統

 



Large Scale Heat Release System – O2/CO2
ISO 9705, IMO FTPC PART 10

Large Scale and Small Scale Oxygen Depletion Calorimeters use the same Analyzers and gas sampling apparatus for the quantitative analysis of Oxygen and CO/CO2 measurements. The Calorimeter RIG houses the Oxygen Depletion Calorimetry Analyzers and gas sampling apparatus including high capacity pumps and filtration in a separate housing that can be easily detached from the A. By this Dual Analysis Calorimeter feature, the Analyzer housing can then be used for both the Cone Calorimeter (ISO 5660) and Large Calorimeter (ISO 9705).

For Large Scale testing, the Analyzer housing is de-coupled from the Cone apparatus and easily moved on the fitted casters to the new location of the Large Scale Calorimeter where it is coupled to power and sampling lines of the Large Calorimeter.

The RIG measures: –
Rate of heat release (kW/m2)
 Effective heat of combustion (MJ/kg)
 Time to ignition
 Smoke density
 CO production
 CO2 production

Specification & Features
HEAT RELEASE CALIBRATION
•Calibration burner for burning pure methane to calibrate heat release measurement (determine C-factor)
•Calibrated Mass flow controller used to control gas flow
•Control and calibration procedure computerized
•Computerized automatic adjustment of gas flow to user set energy level.

GAS SAMPLING AND ANALYSIS SYSTEM
•Gas sampling ring and gas sample lines constructed of stainless steel or Teflon
•Soot Filters
•Sorbants
•Flow controls
•Sample pump
•Cold trap for removing excess moisture
•High Quality Gas Analyzer:

O2 ANALYZER
•Paramagnetic
•0 – 25 % O2 range
•Pressure compensated
•Controlled temperature
•< 100 ppm noise and drift (per standard)
•Computerized calibration and scaling

Optional Gas Analyzers:

CO2 ANALYZER
•NDIR type
•0 – 10 % CO2 range
•Computerized calibration and scaling

CO ANALYZER
•NDIR type
•0 – 1 % CO range
•Computerized calibration and scaling


Technical Data & Requirements
SOFTWARE
•The instrument is calibrated using unique and proprietary Autocalibration techniques eliminating dependence on the operator to make tedious and precise tuning adjustments of the analytical devices.
•The software is Microsoft (MS) Windows compatible.
•The user interface uses the standard Microsoft user interface logic and styling for ease of use and familiarity to simplify calibration and test operations.
•User-friendly pull down menus and tabs show status of the instrument, calibration and test progress.
•Fast data acquisition scanning – Collection and recording of test data a minimum rate of 4 scans per second (250 milliseconds per scan); e.g. 100 second test contains 400 test data scans.
•Real time display shows continuous instrument status
•A minimum of 6 analog input channels are made available to the User to store custom scaled data channels or events in the test file in addition to the channels required for the standard operation and test data gathering.
•Real time test data displayed during test
•Real time test data is collected and stored for analysis in Microsoft Excel.
•Standard calculations are accomplished using MS Visual Basic for Applications (VBA) macros preprogrammed in Microsoft Excel to present results as formatted reports and graphs.
•Macros creating reports and graphs to the ASTM 1354 and ISO 5660 Parts 1 and 2 are included with the software.
•The user, using Microsoft Excel’s macro editor and/or MS VBA editor may easily customize the preprogrammed formatted reports creating: ◦Non-standard calculations of the data
◦Specialized or custom reports
◦Specialized or custom graphs.

•Test Data may be transferred to any database and SPC programs capable of accepting MS Excel file data.

DATA ACQUISITION HARDWARE – (minimum)
•Data acquisition interface with and isolated digital inputs, isolated digital outputs, analog input/output channels, 16-bit analog input channel resolution, 16-bit analog output channel resolution
•Fast data acquisition scanning – Collection and recording of test data a minimum rate of 4 scans per second (250 milliseconds per scan); e.g. 100 second test contains 400 test data scans.
•Intel Pentium 4 processor, 2.20 GHz system clock speed
•256 MB DDR SDRAM at 266 MHz
•Quiet keyboard
•15 inch Flat Panel Color Display
•80 GB 7200 RPM Hard Drive
•48X CD-ROM Drive
•2-button Scroll Mouse
•Integrated 10/100 Ethernet
•56K Data/FAX modem
•Microsoft  WINDOWS 7 Professional Operating System

 

您也可能對以下商品有興趣...

產品關鍵字:

最新廠商動態!

KUBOTA離心機漲價說明
2019.11.07~11.11 9:30-17:00 2019台中自動化機械暨智慧製造展臺中國際展覽館(烏日區中山路3段1號),本公司於度量衡專區攤位559展出,歡迎各界先進蒞臨參觀指教!謝謝
Molecular Analysis 產品印度代理商
Whatman濾紙;Whatman定性濾紙;美國知名大廠;Whatman代理;濾膜;濾紙;過濾頭;歡迎洽詢
BROOKS;美國流量計知名品牌;質量流量控制器;BROOKS 5850E;流量計;

更多

最新儀器!

金永德實驗室設備有限公司

Copyright © 2006-2017 tw17 All rights reserved.
Design: 台灣儀器網

台灣儀器網Tw17 行動條碼QR Code