友翔實業股份有限公司

E2010-PA Labnet 2~4 片膠垂直電泳槽

E2010-PA

Labnet 2~4 片膠垂直電泳槽

ENDURO™ Modular Vertical Gel System

廠牌:Labnet
供應商:賽恩斯生物科技股份有限公司
聯絡電話:02-28110076(代表號)
定價:與我們聯絡

相關網頁

快速詢價

109

行動條碼QR Code
Labnet  2~4 片膠垂直電泳槽-行動條碼QR Code

 

Labnet's ENDURO™ Vertical PAGE System 

A modular system allowing PAGE, electroblotting and 2D gel electrophoresis to be carried out in the same tank, simply by changing the inserts. Users can purchase only the parts they need, or a complete combined system for a cost savings over buying all three systems separately.

  • Modular Design
  • PAGE, Electroblotting and 2D Electrophoresis
  • Quick and easy set up
  • Wide range of accessories

MODULAR SYSTEM

The modularity of the ENDURO™ System is based on three operational inserts and a common buffer tank. All three inserts, PAGE, electroblotting and 2D electrophoresis, have their own electrode assembly that connects into the lid of the buffer tank. PAGE INSERT Set up of gels is quick and easy with the PAGE insert. A set of plates are placed on either side of the insert and held into place by the pressure bar. An additional gel may be run on each side by stacking the plates. The assembly is then placed into the casting stand for pouring the gel. After the gel is polymerized, the insert is removed from the casting stand and placed in the buffer tank.

ELECTROBLOTTING INSERT

The electroblotting insert has a capacity for 3 gels. Setting up blots is easy - gels are sandwiched in the blotting cassettes with the transfer membranes. The cassettes are then placed in the insert, which is in turn placed in the buffer tank. Coiled electrodes in the insert generate a high intensity current, allowing transfer to take place in about an hour.

2D ELECTROPHORESIS INSERT

This insert is used for running the first dimension of IEF gels. Up to ten 8 cm gels are poured in disposable capillary tubes and placed in this insert. Gasketed ports allow for easy insertion and removal of tubes. Blocking plugs are included for closing off ports that are not in use.

BUILT FOR SAFETY AND ENDURANCE

For leak-proof performance and a long service life, the buffer tank is molded from high quality acrylic. Pins on the top of the inserts ensure that the lid is placed onto the insert in the proper orientation. These pins also aid in removal of the lid. Removing the lid disconnects power to the electrodes.

ACCEPTS MOST PRE-CAST GELS

Most precast gels, including NuSep™, Bio-Rad™, Invitrogen™, and Cambrex™, can be used with the ENDURO™ PAGE System. The use of precast gels saves time by eliminating the need to pour gels and wait while they polymerize.

WIDE RANGE OF ACCESSORIES

A variety of combs and spacers of varying widths are available to customize your ENDURO™ system. All are color coded and clearly marked for easy identification. Both notched and plain plates can be purchased with spacers permanently bound for easy set up. Additional fiber pads and replacement cassettes are also available as well as capillary tubes, blanking ports and tube supports. Cooling packs are also available to help reduce buffer temperature during higher voltage or longer runs.

Click to view all of Labnet's ENDURO Electrophoresis products.


RRODUCT SPE.

PAGE SYSTEM

ELECTRO BLOTTING SYSTEM

PAGE 2D SYSTEM

Gel Dimensions

10 x 10 cm

NA

8 cm long

Capacity

2 gels/run*

4 gels/transfer

10 tubes/run

Maximum samples

20 per gel

NA

10 (1/gel)

Tank (WxDxH)

19 x 13 x 15 cm

19 x 13 x 15 cm

19 x 13 x 15 cm

Buffer volume

250 mL 1200 mL 500 mL

1200 mL

500 mL

Included items**

2 ea 10 x 10 notched plates, 2 ea 10 x 10 plates w/spacers, 2 ea 1 mm comb, 12 wells, PAGE Module, casting base                     

4 ea blotting cassettes, 8 ea fiber pads, Blotting module, PAGE System                                  

20 ea capillary tubes, 20 ea tube supports, 10 ea blocking plugs, IEF module, PAGE System                               

*Can run 4 gels by stacking the plates.

**Each system includes buffer tank, lid, leads and cooling pack. The Blotting and IEF Systems also include the PAGE components.


SKU

NAME

DESCRIPTION

E2010-2M       

2D Electrophoresis Module only

Tube Gel Insert with Blanking Ports

E2010-BT

ENDURO™ Electroblotting System

Includes buffer tank and blotting insert

E2010-PA

ENDURO™ PAGE System

Includes PAGE insert, buffer tank with leads and cooling pack

E2010-P2

ENDURO™ PAGE 2D System

Includes 2D insert and PAGE System components

E2010-PB

ENDURO™ PAGE Electroblotting System

Includes the blotting insert and PAGE system components

 


您也可能對以下商品有興趣...

產品關鍵字:

最新廠商動態!

最新!2020年BioTek-Cytation 7上架-最強自動化影像系統多功能光學儀
CRYO流體墊的技術原理
各式 ELISA Kits --細胞激素;代謝研究;腫瘤標誌;骨代謝;毒理學;免疫學;類固醇;維生素;環境;水質;土壤;食品;塵蟎過敏原及植物致病原檢測套組等--歡 迎 洽 詢 !
OMEGA代理商;OMEGA熱電偶接頭;OMEGA熱電偶導線;熱電偶接頭;熱電偶導線;加熱帶;加熱器;壓力傳送器;
Whatman濾紙;Whatman定性濾紙;美國知名大廠;Whatman代理經銷;濾膜;濾紙;過濾頭;歡迎洽詢

更多

最新儀器!

山瑞科學有限公司

Copyright © 2006-2017 tw17 All rights reserved.
Design: 台灣儀器網

台灣儀器網Tw17 行動條碼QR Code