•除了FlexStream ™ Base 之外，尚有五種模組可選擇。

•FlexStream ™ PM -Auxiliary Permeation Module

•FlexStream ™ GF/PM -Gas Feed Permeation Module

•FlexStream ™ SD -Secondary Dilution Module

•FlexStream ™ HG -Humidification Module

•FlexStream ™ IM -Interface Module

•

•流量範圍     : 250-5000cc/min

•流量控制     : 質流量流量控制器 (Mass Flow Controller)

•流量控制    ：≤± 1.5％讀數

•溫度控制     :電子式PID

•操作溫度     :可自行設定由20-150 ℃

•濃度範圍     : ppb -1000 ppm (依滲透管不同產生濃度亦不同)

•恆溫室容量   :

–1/4” 直徑SRT或是HRT拋棄式滲透管(最多可容8支)

–一支 LFH 或 ULED 可充填式滲透管

–最大外部長度6英吋

•滲透管種類   : SRT/HRT拋棄式滲透管/ LFH/ ULED具NIST Traceable報告

•High mass oven with electronic PID control

•Temperature Control Range: 5 ºC above ambient from 20 to 150 ºC (heat only)

•Temperature Setpoint Resolution: 0.01 ºC across control range

•Temperature Display Resolution: 0.01 ºC on front panel touch screen

•Standard Flow Range: 0.25-5.0 liter per minute

•Optional Flow Ranges: 0.1-0.5, 0.1-1.0, 0.5-10.0 lpm

•Flow Control over Calibrated Range: ≤ ±1.5 % of reading

•Flow Change - 0 to Full Scale: < 10 sec (2 time constants) at ambient pressure

•Mode Change - Zero at 1 lpm to Span at 1 lpm: < 5 sec (2 time constants) at ambient pressure

•Output Concentration Range: below 1 ppb to over 1000 ppm depending on emission rate and dilution flow rate

•Local Interface: color touch screen display with virtual keypad

•Remote Interfaces: RS-232 and Ethernet

•Communication Protocol: Modbus RTU

•Power Req: Standard: 115 VAC, 50/60Hz, 2 A

•Power Requirements: Optional (specified at time of purchase): 230 VAC, 50/60Hz, 1 A

•Dimensions: 6 inch Width x 13.5 inch Height x 20 inch Depth (add 3.5 inch to Depth for front panel inlet filter clearance)

•Weight: Approximately 30 lbs