CA-310 Volumetric 卡式微量水份計 CA-310型 (容積法)

CA-310 Volumetric

卡式微量水份計 CA-310型 (容積法)

Karl-Fischer Volumetric titration

廠牌:三菱化學ANALYTECH CO.,LTD.
供應商:南北貿易有限公司 日本三菱化學ANALYTECH CO.,LTD.
聯絡電話:04-22994269
定價:與我們聯絡

相關網頁

快速詢價

66

行動條碼QR Code
卡式微量水份計 CA-310型 (容積法)-行動條碼QR Code

卡式水份計 CA-310

商品規格

商品名稱:

卡式微量水份計 CA-310型 (容積法)
Karl-Fischer Volumetric titration
《可四頻道同時測定、同時表示》

特點:

♦ 擴充功能與多種的搭配應用,最大4頻道同時測量
♦ 觸控式彩色液晶螢幕控制
♦ 可用於多種應用,從簡單的批量測量到全自動化
♦ 適用於多種廣泛的應用,藥品、食品、油品...等

螢幕:
8.4英吋彩色液晶觸控式螢幕
重量:
主機     CA-310MC: 約 2kg
攪拌座  CA-310STR: 約 2.5kg
Burette CA-310BRT:約 3.5kg
尺寸:
主機     CA-310MC: 約 244 W× 161 D× 215 Hmm
攪拌座  CA-310STR: 約 120 W× 342 D× 135 Hmm
Burette CA-310BRT:約 108 W× 320 D× 135 Hmm
 
 
請選用三菱水份儀專用之 陽陰極液、滴定液、脫水溶劑及標準品…等試劑

選購品


VA-300
VA-300 樣品舟加熱蒸發裝置
尺寸:約 323W× 170 D× 260 Hmm
重量:約 3 kg
加熱溫度:50°C~300°C
試料量:10g 以下
測定範圍:5ppm 以上
適用樣品:各種塑料、橡膠、食品、無機鹽類、醫藥品…等粉末/固體樣本

VA-230
VA-230樣品瓶加熱蒸發裝置
尺寸:約 300W× 135 D× 220 Hmm
重量:約 3.5 kg
加熱溫度:70°C~300°C
試料量:10g 或 2.5ml 以下
測定範圍:30ppm 以上
適用樣品:各種塑料、橡膠、食品、無機鹽類、醫藥品…等粉末/固體樣本

VA-24VS
VA-236S自動樣品瓶加熱蒸發裝置(多檢體)
尺寸:約 370W× 560 D× 400 Hmm
重量:約 18 kg
加熱溫度:70~300°C
試料量::<10g and <2.5ml in volume (solids) <5ml (oils)
Vials (10ml):Total 33, including purge vials
適用樣品:可連續檢測33種樣品,(一般固體用)各種塑料、橡膠、食品、無機鹽類、醫藥品…等粉末/固體樣本。

VA-121
VA-121高溫式加熱蒸熱裝置
尺寸:約 420W× 260 D× 240 Hmm
重量:約 15.5 kg
加熱溫度:250°C~1000°C
試料量:10g 以下
測定範圍:10ppm 以上
適用樣品:(高溫用)鐵礦、黏土、金屬氧化物及無機鹽類…

VA-122
VA-122高/低溫雙爐式加熱蒸熱裝置
尺寸:約690W× 290 D× 410 Hmm
重量:約20 kg
加熱溫度:70°C~300°C, 250~1000°C
試料量:10g 以下
測定範圍:5ppm 以上
適用樣品:鐵礦、黏土、焊桿、金屬氧化物及無機鹽類…

VA-210
VA-210油脂加熱蒸發裝置
尺寸:約 120W× 220 D× 230 Hmm
重量:約 3 kg
加熱溫度:70~199°C
試料量:50g 以下
測定範圍:5ppm 以上
適用樣品:潤滑油、動物脂等製品

VA-122
VG-200液化氣體氣化裝置
尺寸:約150W× 350 D× 270 Hmm
重量:約 6 kg
加熱溫度:40°C~90°C
Injection rate:100 to 600ml/min
Injection volume:1 to 99L
Ideal infector for propane, butane, and other liquefied gases. A predefined amount of LPG will be vaporized and injected into the moisture meter.

 

 

CA-310《Coulometric》

Highly scalable with maximum 4-channel simultaneous measurement controlled by wide color touch screen.
The system can be applied for a multiude of applications, from simple batch measurement to full automation.
Progressive moisture meter, CA-310 is active in wide range of applications, pharmaceuticlas, foods, oils etc.

CA-310

 
 CA-310 Specifications 《Coulometric Moisture Meter》

Measurement method: 
Coulometric Karl-Fischer titration,
4-channel simultaneous measurement (option)

Titration control:  Constant Current pulse timer control

End point detection:  Constant current polarization potential
Electrolysis current:  430mA 

Titration speed:  Avg. 2.2mgH2O /min (36μgH2O/sec.)

Background:  Automatic correction, constant display,
background level at start of measurement is displayed

Measuring range:  5μg to 100mgH2O

Detection sensitivity:  0.1μgH2O

Repeatability:  <0.3% RSD at 1mg or more (n=10)

Stirring method:  Magnetic stirrer

Titration cell:  Volume: 150ml  

Display:  8.4 inch color LCD Touch panel

File configuration:  Method parameters: 99
Schedules: 99

Calculation functions:  Calculation of concentration, statistical calculation, recalculation

Printer:  Built-in thermal printer, impact printer(Optional)

Vaporizer operating  
functions: 
VA-300, VA-200, VA-210, VA-230, VA-236S, VA-121, VA-122, VG-200
(stepped temperature control available for each vaporizer)

External I/O:  Electronic balance: Automatic weight input
Dedicated USB memory port: Storage of measurement results, import/export of settings

Additional functions:  Data Integrity (GLP/GMP compliance),
troubleshooting, electrode conditioning

Operating environment:  Temperature: 15-40oC
Relative humidity: Up to 85% with no condensation of moisture

Dimensions, Weight:  Main Unit: Approx. 244(W)× 161(D)× 215(H) mm, 2kg
Stirrer: Approx. 120(W)× 342(D)× 135(H) mm, 2.5kg

 
Options

Sample Boat Type VA-300
model VA-300

Various types of plastics, rubber, foods, pharmaceuticals, inorganic salts and other powders and solid samples

Heating temperature: 50~300oC
Heater: Transparent electro-conductive glass 150W
Sample size: Up to 10g
Measuring range: From 5ppm (when used in combination with CA-300)
Carrier gas Nitrogen gas, 0.1~0.5 l/min
Dimensions, Weight: approx. 323(W)× 170(D)× 260(H) mm, 4kg


Disposable Vial Type VA-230
model VA-230

Enables easy measurement using disposable vials. Various types of plastics, rubber, foods, pharmaceuticals, inorganic salts and other powders and solid samples

Heating temperature: 70~300oC
Heater: Aluminum block heater 60W×2
Sample size: Up to 10g and 2.5ml volume, vial volume:10ml
Measuring range: From 30ppm (when used in combination with CA-200)
Carrier gas Nitrogen gas, 0.1~0.5 l/min
Gas dryer: Desiccant (Sicapent®) tube, 1
Dimensions, Weight: approx. 300(W)× 130(D)× 240(H) mm, 4kg


VA-24VSAutosamplers and Vaporizers
model VA-236S

Automatic and consecutive measurements up to 33 samples(Vials).Carrier gas is controlled by a mass flow controller, realizing a stable flow rate regardless of the gas pressure.
Platics, rubbers, food products, medical products, inorganic salts, powders, and other solid samples can be measured. Certain oil samples can also be measured using a special needle.

Heating temperature: 70~300oC
Gas flow: 0 to 500ml/min(set from moisture meter)
Carrier gas: Nitrogen gas, <0.01 % moisture
Carrier control: Mass flow controller
Vials(10ml): Total 36, including purge vials
Sample size: <10g and < 2.5ml in volume(solids) < 5ml(oils)
Power supply: AC 100-120V, 200VA/AC220-240V, 250VA
Dimensions: 370(W)*560(D)*400(H) mm
Weight: 18kg


Autosamplers and Vaporizers
model VG-200
VA-122
Ideal injector for propane, butane, and other liquefied gases. A predefined amount of LPG will be vaporized and injected into the moisture meter.

Applicable gases: Propane. Butane,other liquefide gases(Up to 5 different gas factors can be set)
Injection rate: 100 to 600ml/min
Injection volume: 1 to 99L
Heater temperature: 40 to 90℃
Power supply: AC100-120V, 40VA/ AC220-240V, 20VA
Dimensions: 150(W)*350(D)*270(H) mm
Weight: 6 kg



High Temperatures VA-121
model VA-121

Iron ore, clay, metal oxides, inorganic salts

Heating temperature: 250~300oC
Heater: Electric Furnace (Kanthal wire) 800W
Sample size: Up to 10g (using quartz boat)
Carrier gas Nitrogen gas, 0.1~0.5 l/min
Measuring range: From 10ppm (when used in combination with CA-200)
Gas dryer: Desiccant (Sicapent®) tube, 1
     Desiccant (Sicapent®) tube, 2
Dimensions, Weight: approx. 420(W)× 260(D)× 240(H) mm, 15.5kg


High/Low Temperatures VA-122
model VA-122

Enables measurement of ancillary moisture. Iron ore, clay, welding rods, metal oxides, inorganic salts

Heating temperature: 70~300oC, 250~1000oC
Heater: Electric Furnace (Kanthal wire) 1000W
Sample size: Up to 10g (using quartz boat)
Carrier gas Nitrogen gas, 0.1~0.5 l/min
Measuring range: From 5ppm (when used in combination with CA-200)
Gas dryer: Desiccant (Sicapent®) tube, 1
     Desiccant (Sicapent®) tube, 2
Dimensions, Weight: approx. 690(W)× 290(D)× 410(H) mm, 20kg


For Lubricants VA-210
model VA-210

Lubricants, grease, tar, iron ore, clay, metal oxides, inorganic salt proudcts

Heating temperature: 70~199oC
Heater: Transparent electro-conductive glass 200W
Sample size: Up to 50g
Carrier gas Nitrogen gas, 0.1~0.5 l/min
Measuring range: From 5ppm (when used in combination with CA-200)
Gas dryer: Desiccant (Sicapent®) tube, 1
Dimensions, Weight: approx. 120(W)× 220(D)× 230(H) mm, 3kg


您也可能對以下商品有興趣...

產品關鍵字:

最新廠商動態!

錫記貿易/正隆儀器 最新台灣獨家總代理美國 WHEATON 百年品牌,提供您最專業與完整的實驗室產品!
錫記貿易/正隆儀器 台灣獨家總代理 SAINT-GOBAIN 聖戈班,享譽全球之 TYGON 管,提供您先進之傳輸材料!
錫記貿易股份有限公司代理美國 BRADY 低溫抗凍 SAMPLE 之保存及管理系統,各種材質,尺寸抗凍標籤紙,標籤印製機, 讓 SAMPLE 條理不紊。
Attension 新型接觸角儀 Theta Flex 更高解析及自動化
慶賀!伯新代理DLEVELOP廠牌,達6000多種ELISA kit符合各式分析試驗!

更多

最新儀器!

益翔科技有限公司-實驗室設備工程、無塵室設備工程

Copyright © 2006-2017 tw17 All rights reserved.
Design: 台灣儀器網

台灣儀器網Tw17 行動條碼QR Code