H0110/V1 靜電衰減測試儀H0100/V1

H0110/V1

靜電衰減測試儀H0100/V1

Static Honest Meter(for Electrostatic Propensity)H0100/V1

廠牌:代理
供應商:大台北尖端儀器有限公司
聯絡電話:02-2531-0981
定價:與我們聯絡

快速詢價

9114

行動條碼QR Code
靜電衰減測試儀H0100/V1-行動條碼QR Code

相關標準

JIS L 1094-1980日本工業標準:機織物與針織物靜電性能測試方法
GB/T 12703

用途/長處

本機中的測定器是測試各種素材的靜電擴散性的靜電衰減測試儀器,試樣由於受到光暈放電產生的空氣離子照射而帶電,空氣離子照射停止後,通過測定器測出電荷的衰減曲線,然後由分析儀自動計算出電壓衰減的半衰期。
靜電分析儀V2是一台解析運算器,通過靜電測試儀獲取靜電衰減曲線,自動計算出電壓衰減的半衰期,採用單鍵式操作,自動測量素材的靜電衰減性。連接個人電腦後可以實現如下功能:
衰減率(半衰期通常設定50%)的設定:2~100%
測試數據的電腦數據保存
溫濕度數據自動保存至文件夾
電壓坐標.時間坐標都可以隨意放大或縮小
適用於測量膠卷、薄板、絲線、布料、地毯、玻璃等所有薄片狀試樣。

備考

【附 屬 品】
電源線 1根
信號線 1根
校準工具&平衡器 1式
六角扳手 2根
保險絲2A 3個

 

 

樣式

 

H0110/V2
測試溫度範圍 0~40度
測試濕度範圍 20~90% RH, 不結露
環境溫度容許範圍 0~40度
高壓電源 H.V(光暈放電電壓) 0~10kV CAL(校準電壓) 0~3kV
輸出信號 分析儀端口(分析儀)、SYNC端口(示波器)電壓 0~±10V 精度約10%
容量 100VA
電源 AC 220V, 50Hz
外形尺寸 420(W)×450(H)×280(D)mm
重量 33kg

 

Reference standard

JIS L 1094;GB/T 12703

Use/Good point

Static Honest Meter is a measuring instrument for attenuation of static electricity, most appropriate for investigating the diffusibility of static.
This device is used to electrify the specimen by irradiating it by air ions generated by corona discharges initiated by the device, and then, after the irradiation is stopped, it is used to investigate the decay curve of the charge on the specimen.
﹣Applied on JIS L1049-1980 Electrostatic Propensity Testing Method for woven fabric and knitted work.
﹣By selecting the polarity and applied voltage for corona discharge, it is possible to electrify the specimen with either positive or negative charge. It is also possible to change the voltage value.
﹣Without any friction, no damages will be caused to the specimen, and accurate and repeated measurement is possible.
﹣Compared with the friction electrification or direct voltage applying electrification methods, the corona discharge method has excellent reproducibility, making it possible to compare the specimen with those of other methods.
﹣All specimens in sheet form, such as films, board, thread, cloth, carpet, or glass panes, can be subjected to measurement by using this device.
Analyzer is an analyzing and computing unit which can automatically compute the half-life period of voltage decay from the static decay carve obtained from the host meter.
By connecting the analyzer and the honest meter together, it is possible to measure the attenuation of materials automatically in one-touch action.

Largest photo
     

 

Spec

  H0110/V2
Functional temperature range 0~40 degree
Functional humid range 20~90% RH, no condensation
Storage temperature range 0~40 degree
High pressure H.V(corona discharge) 0~10kV CAL(calibration) 0~3kV
Output signal Analyzer port(Analyzer)、SYNC port(oscillograph) Pressure 0~±10V Accuracy 10%
Capacity 100VA
Power source AC 100V±10%, 50/60Hz
Outside dimensions 420(W)×450(H)×280(D)mm
Weight 33kg

您也可能對以下商品有興趣...

產品關鍵字:

最新廠商動態!

KUBOTA離心機漲價說明
2019.11.07~11.11 9:30-17:00 2019台中自動化機械暨智慧製造展臺中國際展覽館(烏日區中山路3段1號),本公司於度量衡專區攤位559展出,歡迎各界先進蒞臨參觀指教!謝謝
Molecular Analysis 產品印度代理商
Whatman濾紙;Whatman定性濾紙;美國知名大廠;Whatman代理;濾膜;濾紙;過濾頭;歡迎洽詢
BROOKS;美國流量計知名品牌;質量流量控制器;BROOKS 5850E;流量計;

更多

最新儀器!

景興電腦科技有限公司--紅外線熱像儀系列(NEC F30)、影像工業內視

Copyright © 2006-2017 tw17 All rights reserved.
Design: 台灣儀器網

台灣儀器網Tw17 行動條碼QR Code