非擴散性紫外線吸收方式空氣中臭氧濃度分析儀

GM-PRO  /  APPLICATIONS

Non dispersive UV absorption analyzer for ozone gas in industrial and lab  analyzing. The analyzer also can be used for tough and rigid environment.

- Measuring range up to 300 O³ /M³ (25% w/w)
- Fast and high accurate measurement (for energy-saving control of generator).
- Advanced microprocessor technology.
- All parameters software programmable.
- Graphical data and trend display.
- Serial and analog output standard.

GM-OEM /  APPLICATIONS

Continuous process UV ozone monitor for measurement of ozone in air or oxygen at high concentrations.

- Measuring range: 0-199.9 gO³ / m³ (SI-Unit).
- Accuracy: 1 % of scale end.
- Response time: < 1 s.
- Output: 0-20 mA, linear

MP  /  APPLICATIONS

Continuous process UV ozone analyzer  for measurement of ozone in air or oxygen at low concentrations.

The ozone monitor OZOMAT MP Multi-range is designed to cover the complete measuring range from 0-2 g O³ /m³ (0-1 pm v/v) up to 0-20 g O³ /m³ (0-1.6% w/w). This is done with the same accuracy and reliability as all our products, but it replaces two (or three) units necessary in the past.

The OZOMAT MP Multi-range can be used as a single monitoring system or in combination with the sampling point selector PERIPHERAL MUS.

LUM  /  APPLICATIONS

Continuous chemiluminescent process ozone analyzers for measurement of ozone in waste and ambient air at very low concentration.

　

- Measuring range: 0 to 500 ppb. (1000 µg O³/m³).
- Minimum detectable concentration: 1 ppb.
- Automatic calibration option via internal UV source.

SEN-6060  /  APPLICATIONS

Stationary ozone measuring instrument for the hazardeous leackage.

- Display of measuring value 0.01 to 1.00 ppm O³.
- Red signal lamp and bleep signal at 1 TLV (0.1 ppm); signals at 2 TLV (0.2 ppm) with
  doubled frequency.
- Temperature compensation.
- Automatic zero point adjustment.

SEN-P  /  APPLICATIONS

Mobile ozone measuring instrument for the hazardeous leackage.

- No crosswise sensitivity of Nitrogen Oxides.
- Display of measuring value 0.01 to 1.00 ppm O³.
- Red signal lamp and bleep signal at 1 TLV (0.1 ppm); signals at 2 TLV (0.2 ppm) with
  doubled frequency.
- Temperature compensation.
- Automatic zero point adjustment.