GenOx HCOG1 大容量氮氣體產生器

GenOx HCOG1

大容量氮氣體產生器

High Capacity Nitrogen Generators

廠牌:Labgas/Finland
供應商:建成科學儀器股份有限公司
聯絡電話:02-29103818
定價:與我們聯絡

快速詢價

2793

行動條碼QR Code
大容量氮氣體產生器-行動條碼QR Code

 

Labgas GenOx Oxygen Generators

Labgas GenOx series of industrial oxygen generators produce constant flow high purity oxygen, for industrial applications.

Ambient air is compressed in an air-cooled compressor, and put through a dryer and filters for removal of water and oil. Compressed air then flows through the carbon molecular sieve (CMS) inside the adsorber beds where nitrogen, carbon dioxide, moisture and some hydrocarbons are adsorbed and a stream of clean, dry, high purity oxygen gas leaves the adsorber bed. During adsorption in one bed, the second bed is regenerated by depressurization to ambient pressure. The technology is called pressure swing adsorbtion (PSA). The adsorption / desorption cycle is controlled by a microprocessor. Oxygen flow and purity is preset during test operation prior to shipment of the unit.

  • cost effective on-site gasgeneration
  • latest PSA technology with Carbon Molecular Sieve
  • microprocessor controlled automatic operation
  • low maintenance requirement system
  • system delivered pretested and tuned for operation

 

Technical Specifications
Model GenOx  HCOG1 GenOx  HCOG2 GenOx  HCOG3
Width mm 600 700 600
Depth mm 380 400 400
Height mm 1000 1400 1600
Weight kg 60 80 100
Max Dust Particle Size µm 15
Noise Level During regeneration Period db 50
Flow L / HRS 1000 2000 3000
Oxygen Purity With Max Flow 93,3% +/- 3%
Inlet Air Requirements Dew Point + 4*C
Inlet / Outlet Max Pressure barg 5 / 3,5
Power Rating For Control Unit  W 100
In/Out connections, Compression Fittings 12 mm / 8 mm Cu
Electrical

230 V / 50 Hz or 110 V / 60 Hz

Power Consumption

1,2 kW / Produced Nm3 O2


Labgas GenNit Nitrogen Generators

Labgas GenNit series of nitrogen generators produce constant flow high purity nitrogen, for industrial applications.

Ambient air is compressed in an air-cooled compressor, and put through a dryer and filters for removal of water and oil. The compressor can be either integrated, inbuilt into the generator, or as a separate part. Compressed air then flows through the carbon molecular sieve (CMS) inside the adsorber beds where oxygen, carbon dioxide, moisture and some hydrocarbons are adsorbed asd a stream of clean, dry, high purity nitrogen gas leaves the adsorber bed. During regeneration period the adsorber beds are being depressurized to ambient pressure, and nitrogen is taken from the storagde tank. This technology is called pressure swing adsobtion (PSA). The adsorption/desorption cycle is controlled by a micro processor system. Nitrogen flow and purity is preset during test operation prior to shipment of the system. The nitrogen produced conforms to ISO specs.

  • cost effective on-site gasgeneration
  • latest PSA technology with Carbon Molecular Sieve
  • microprocessor controlled automatic operation
  • low maintenance requirement system
  • system delivered pretested and tuned for operation

 

您也可能對以下商品有興趣...

產品關鍵字:

最新廠商動態!

OMEGA代理商;OMEGA熱電偶接頭;OMEGA熱電偶導線;熱電偶接頭;熱電偶導線;加熱帶;加熱器;壓力傳送器;
Whatman濾紙;Whatman定性濾紙;美國知名大廠;Whatman代理;濾膜;濾紙;過濾頭;歡迎洽詢
AAT 核酸染劑 Cyber Green/ Cyber Orange - 想怎麼染就怎麼染 (內染/外染/染樣品) 特優惠價專刊 ! 至 7 月底止
有立公司 5/25~5/29 舉行員工旅遊 5/30正式上班
印度台灣形象展 逾2萬人次觀展採購

更多

最新儀器!

益翔科技有限公司-實驗室設備工程、無塵室設備工程

Copyright © 2006-2017 tw17 All rights reserved.
Design: 台灣儀器網

台灣儀器網Tw17 行動條碼QR Code