用途：

該試驗機設計用於印刷適性的評估測試，包括印刷油墨、紙張、輥輪等等性能評估。

通過模擬測試，用戶可以獲取與實際印刷相同的測試結果，該儀器操作簡便，無須特殊培訓。用戶可以將本機印刷的樣品同採用國際標準印刷的標準試樣直接對比以評估材料印刷適性的好壞，不僅僅表述印刷壓力、速度、墨層厚度或紙張表強等等印刷適性。從實際生產的角度出發，該機將幫助使用者控制產品質量，分析工廠的產品問題來源。

 

特點：

    該試驗機的測試過程即為一種將油墨轉印至緊貼於印刷滾筒上的紙張上的簡單印刷操作。油墨轉印過程由橡膠滾輪完成。

    RI-1型繞印刷滾筒（impression cylinder）一圈有四個印刷單元，滾筒轉一圈完成一個四色印刷。RI-2型為單色印刷，RI-3型為3色印刷。所有型號的印刷機理簡單、操作方便。

1.     用於紙張的平滑性、油墨受理性、油墨吸收性、耐剝離性、掉毛、透印、漏印以及其它特性的評估測試。

2.     用於油墨特性的評估，例如色調、油墨遮蓋性、印墨疊印，油/水分離性，油墨未乾造成的污損，紙張印刷中的可操作性能評估。

 

描述：

1.    RI-1型有一個印刷滾筒和四個油墨轉印單元。

RI-2型有一個印刷滾筒和一個油墨轉印單元。

RI-3型有一個印刷滾筒和兩個油墨轉印單元。

2.    油墨轉印單元配有一個剛性滾和一個膠滾，滾輪測試表面面積為1,000cm²。

3.    滾輪轉速為500r.p.m.。

4.    RI-1型的四個印刷單元象衛星一樣安置於印刷滾筒的周圍。

5.    兩個滾輪可通過手動，瞬間與印刷滾筒接觸或分離。

6.    鋼滾與橡膠滾，或者橡膠滾與印刷滾筒之間的壓力相互間精確可調。

7.    需要時橡膠滾可方便快捷地卸下/安裝。

8.    橡膠滾用作印刷工作中的平台滾輪。

9.    印刷滾筒的表面平滑，滾筒於安置紙條，手動操作。

 

規格：

 

型號	RI-1型	RI-2型	RI-3型
印刷色數	4	1	2
紙張尺寸（最大）	187mm X 257mm	187mm X 257mm	187mm X 257mm
橡膠滾尺寸	65mm X 250mmL	65mm X 250mmL	65mm X 250mmL
金屬滾尺寸	65mm X 265mmL	65mm X 265mmL	65mm X 265mmL
電源	AC100V, 400W	AC100V, 400W	AC100V, 400W
金屬滾轉速	500r.p.m.	500r.p.m.	500r.p.m.
相對轉速	100r.m.p.	100r.m.p.	100r.m.p.
印刷滾筒尺寸	300mm X 300mmL	300mm X 300mmL	300mm X 300mmL
機械落地尺寸	985mm X 663mm	709mm X 612mm	735mm X 578mm
機械高度	620mm	512mm	540mm
淨重（包裝重）	290kg (350kg)	170kg (225kg)	190kg (255kg)

選配裝置特性：

型號	RI-1型	RI-2型	RI-3型
無段變速式輥筒驅動單元	可配置	可配置	可配置
電源	DC100V, 200W	DC100V, 200W	DC100V, 200W
轉速單元	40-120 r.p.m.	40-120 r.p.m.	40-120 r.p.m.
潤濕裝置	可配置	可配置	無
橡膠輥尺寸	62mm X 250mmL	62mm X 250mmL
Molton厚度	2 mm	2 mm
三輥裝置（印板安裝裝置）	無	可配置	無
橡膠輥尺寸		75mm X 250mmL
印刷輥筒尺寸		65mm X 250mmL

         

 

 

 

---

  

 

 

RI-1型(4色刷)・RI-2型(1色刷)RI-3型(2色刷)３種類

 

  

 

用途

RI(Rotay Ink Taster)JIS-5701K「平版及凸版試験方法」被印刷物印刷適性試験評価試験器一指定。
RI大日本印刷株式会社中央研究所指導主紙印刷適性試験評価開発試験器、実際印刷条件再現試験制度良短時間特長CCM(Computer Color Monitor)標準見本色作成、以外紙印刷薬液受容性・色合・艶等試験評価、化粧品皮膚具合等試験評価用途。
使用実績RI限、液体液体塗布物質間受容性・発色・艶等試験評価場合使用。

 

USES

This instrument is designed to examine printability of printing ink, paper roller, blanket, fountain solution and so on .

You can get the dame results as practical printing without any problem.

It is very easy to handle, so you do not need any skilled operator. And also you can evaluate which material has better printability by comparing the specimens to be tested with the known standard, not to express the printability such as printing pressure, speed, ink thickness or surface strength of paper etc. in theoretical figures.

From the practical point of view, it will help you to control the quality and to analyze where the trouble come form in your plant.

You can make a selection of three models to meet your requirement.

 

特長

1.       印刷機近剪断力実際印刷条件再現、試験結果現実印刷結果間差小。

2.       段取簡単短時間印刷適性試験評価。従研究室生産現場品質評価検査使用。

3.       展色胴最大10種類被印刷物取付、同一10種類被印刷物対印刷適性同一印刷条件同時試験評価。

4.       2、及4分割使用同一印刷物対24種類印刷適性同一印刷条件同時試験評価。

5.       被印刷物Dry/Wet状態表面強度・印刷光沢・吸収性・乾燥・発色・印刷濃度・被印刷物塗布等試験評価範囲。

6.       構成部品剛性構造簡単加工精度高試験結果再現性、使故障少。従上記2特長生産現場厳使用耐。

7.       小型構造机上設置。

FEATURES

Tests are made in a simple operation of transferring ink which thoroughly mixed on the slub, to the paper feed onto the cylinder. The transfer of the ink is made by the rubber roller. Model RI-1 has four units the operation around the cylinder. Accordingly, one complete rotation of the cylinder results in a four-color over printing. The three-color or two-color over printing can be easily performed by dismounting one or two units. Model RI-2 is single color and Model RI-3 is two color.

Mechanism of both model is very simple and easy operation.

1.       Tests about smoothness, ink receptivity, ink absorbency, picking, fluffing, strike through, show-through and other characteristics of paper.

2.       Tests about ink characteristics such as color tone mileage, trapping, ink/water relationship offsetting, operation of paper.

 

構造原理

RI金属練、被印刷物取付展色胴、金/展色胴間圧印調整装置、金属駆動装置構成。・軽量金属練塗布後、金属起動一般約１分間、500R.P.M回転数100R.P.M間剪断力作用円周方向幅方向薄均一練。円周方向幅方向薄均一練後、金属停止上展色胴取付被印刷物移。

 

Description

1.    RI-1 has one impression cylinder and four ink transfer units.

RI-2 has one impression cylinder and one ink transfer units.

RI-3 has one impression cylinder and two ink transfer units.

2.    Ink transfer unit being equipped with one steel roller and one rubber roller. The surface area of roller is 1,000cm²

3.    Revolution of each roller is 500rpm.

4.    Each of the ink transfer units of RI-1 is located at the rigid impression cylinder, which is arranged like a satellite.

5.    A pair of roller can be simultaneously contacted with or can throw off be cylinder by handle.

6.    Impression between steel and rubber roller or rubber roller and impression cylinder are adjustable each other precisely.

7.    Rubber roller can be dismounted from the tester easily and quickly when it is necessary.

8.    Rubber roller works as a plate roller for the impression cylinder and steel roller functions as vibrator.

9.    The surface of the impression cylinder is smoothly ground. The cylinder is equipped with paper gripper. It is rotated manually.