濃度範圍：ppb -1000 ppm (依滲透管不同產生濃度亦不同)

恆溫室容量： 5/16”直徑SRT或是HRT拋棄式滲透管(最多可容6支)

　　　　　　一支 LFH 或 ULED 可充填式滲透管

　　　　　　最大外部長度6英吋

流量範圍： 250-5000cc/min
準確度： +/- 1%

操作溫度：5-150 ℃

溫度控制精度： 0.1 ℃

樣品壓力： 40 psig (最大)

電力：115 VAC, 2A

尺寸：6”寬x13.5”高x20”深

重量：30 lbs

 

• Operating Modes: standby, zero, span

• Designed for expandability

• Flow path designed for maximum flexibility with minimum error

• Flow path suitable for reactive mixtures – mixture contacts only glass, Teflon® , stainless steel or coated stainless steel

• Accepts disposable permeation tubes, wafer tubes, diffusion tubes, refillable liquid filled tubes, or prefilled gas fed tubes

• Accepts up to 8 disposable tubes with maximum 6 inch length overall, 5/16 inch diameter (Trace SourceTM SRT, HRT, and EL tubes)

• Accepts 1 Trace SourceTM refillable LFH or 57 Series tube

• High mass oven with electronic PID temperature control

• Temperature Control Range: 5˚C above ambient to 150˚C

• Temperature Set Point Resolution: 0.1˚C

• Temperature Display Resolution: 0.1˚C

• Standard Flow Range: 0.25 – 5.0 liters per minute

• Optional Flow Ranges: 0.1 – 0.5, 0.5-10.0 liters per minute

• Flow Control over the Calibrated Range: ≤ ±1.5% of reading

• Sample Output Pressure: up to 40 psig

• Output Concentration Range: sub ppb – 1000 ppm depending on emission rate and dilution flow rate

• Power Requirements: standard 115VAC, 2A

• Power Requirements: optional (specify at purchase) 230VAC, 1A

• Dimensions: 6 inch W. x 13.5 inch H. x 20 inches depth (add 3.5 inch to depth for clearance)

• Weight approximately 30 lbs.