線切割機用電子式張力計

• 張力範圍:
  從 0.1 - 500 cN
  到 250 - 2500 cN

應用：
線切割機

便於操作的基本單元

V槽導輪 輪徑
O 12.5 mm

功能說明:

1.微處理器控制獲得最高測量精度

2.可靠的應變測量原理

3.當張力波動時可通過選擇掃瞄速率（0.5-1-2或4秒）提供穩定的讀數（電子阻尼）

4.測量頻率：62測量 單位/秒

5.在更新間隔t1之間，顯示器累計平均值

6.具有最小值、最大值和峰值的記憶功能

          

7.在張力儀多種測量場合允許進行零點調整，以保證最高的測量精度

8.可根據客戶提供的材料進行兩種不同材料的標定

9.內置材料線徑補償器，在型號-500cN和更高量程的張力儀中，提高變徑後的測量精度

10.為了在線使用，安裝孔允許進行固定式安裝

 

特性

l     數值一目了然

導向輪

測量材料

讀數

l   導線架和導向輪移動裝置確保運動材料易於導入

l   帶有球軸承的V型導向輪

l   防滑鋁外殼

l   電池供電

l   CE認證（電磁適應性試驗）

l   對電子放電所產生的衝擊和損害具有防護功能

l   附有標準報告的測試報告 

可選型號

型號	張力範圍 cN	精度	測量頭 寬度 mm	校準材料 PA**	應用線材工業 例如 EDM 線	材料 補償
DTMB-500	0.1 - 500.0	0.1 cN	65	0.12+0.20 mm Ø	ca. 0.05 mm Ø	X
DTMB-2000	200 - 2000	1 cN	65	0.40+0.70 mm Ø	ca. 0.25 mm Ø	X
DTMB-2500	250 - 2500	1 cN	116	0.40+0.70 mm Ø	ca. 0.25 mm Ø	X

 

---

 

 

3 Tension ranges from 0.1 - 500 cN to 250 - 2500 cN

Electronic tension meter for checking tension of wires at EDM wire machines

Tension meter for EDM wires with approx. 0.05 and 0.25 mm Ø

Special Features

• Microprocessor controlled tension meter for highest accuracy
• Selectable update rates (0.5, 1, 2 or 4 seconds) to provide steady readings when tensions fluctuate (electronic damping)
• Measuring frequency: 62 measurements/second
• The display shows averaged values calculated during the update
  interval t₁ e. g. every second 1 x

   

DIP switch
for adjustments
by operator e. g.
display update time

• Saving MIN, MAX and PEAK values during a user-selected period. These values can be recalled at the display.
• Zero adjustment feature permits use of the tension meter in various measuring positions, maintaining highest accuracy
• Measuring principle: double beam in bending with strain gauge
• Calibration to customer supplied material is available (up to two different material calibrations)
• Tension meter with built-in material thickness compensator improves accuracy for changing diameters (from tension range - 500 cN)
• Hand-held unit with built-in mounting holes permit fixed installation for online use

Easy mounting: For online application Material thickness compensator: For better accuracy the material to be measured or a similar material with the same diameter should be inserted

Standard Features

• Everything in operator’s view:
  - the guide rollers
  - the measured material
  - the readings
• Filament guide and roller shifting mechanism ensure easy acquisition of the running material
• Ball-bearing mounted, V-grooved guide rollers
• Tension meter with rugged aluminium housing
• Battery operated (AC adapter for continuous operation available)
• Certificate of Compliance with the order 2.1 according EN 10204 is included
• Optionally available: Insprection Certificate 3.1 according EN 10204 with calibration report

Available Models

Model	Tension Range cN	Reso- lution	Measuring Head Width* mm	SCHMIDT Calibration Material PA**	Applications wire industry e.g. EDM wire	MDA***
DTMB-500	0.1 - 500.0	0.1 cN	65	0.12+0.20 mm Ø	ca. 0.05 mm Ø	X
DTMB-2000	200 - 2000	1 cN	65	0.40+0.70 mm Ø	ca. 0.25 mm Ø	X
DTMB-2500	250 - 2500	1 cN	116	0.40+0.70 mm Ø	ca. 0.25 mm Ø	X

Other tension ranges and measuring head widths are available on request.
Other units of measure are available, such as  g.
* Depending on model, either width of filament guide or outer distance between outside guide rollers.
** Suitable for 95 % of applications - PA = Polyamide Monofilament
*** Material Thickness Compensator

Calibration to customized material:
If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied.

 

Specifications

Calibration:	According to SCHMIDT factory procedure
Accuracy:	From 10 % up to 90 % of tension range: ±0.5 % full scale and ±1 digit remaining tension range and other calibration materials: ±3 % full scale und ±1 digit
Overrange:	Approx. 15 % full scale, without accuracy guarantee
Overload protection:	100 %
Measuring principle:	Strain gauge bridge
Measuring roller deflection:	Max. 0.2 mm
Signal processing:	Digital
Measuring frequency:	62 measurements/s
Converter:	12 bit A / D
Temperature coefficient:	Gain: less than ±0.01 % full scale/ºC Zero point: less than ±0.3 % full scale/ºC
Display:	LCD 4 digit, 12 mm high
Display update rate:	Adjustable 0.5, 1, 2 or 4 s (averaging)
Field adjustment:	±7 steps in 1.5 % increment
Memory:	MIN, MAX, PEAK and last value
Temperature range:	10 - 45 ºC
Air humidity:	85 % RH, max.
Power supply:	4 Batteries 1.5 V, size AA (Approx. 20 h continuous use)
Auto Power Off:	After 2 minutes of non-use
Housing material:	Die-cast aluminium
Housing dimension:	235 x 76 x 45 mm (LxWxH)
Weight, net (gross):	Approx. 680 g (approx. 1500 g)