DTLB-2000 To DTLX-10K 電子式張力計(光纖電纜緩衝管用) DTLB-2000 To DTLX-10K

DTLB-2000 To DTLX-10K

電子式張力計(光纖電纜緩衝管用) DTLB-2000 To DTLX-10K

Tension Meter for fibre optic cables and buffer tubes No.DTLB-2000 To DTLX-10K

廠牌:代理
供應商:大台北尖端儀器有限公司
聯絡電話:02-2531-0981
定價:與我們聯絡

快速詢價

9755

行動條碼QR Code
電子式張力計(光纖電纜緩衝管用) DTLB-2000 To  DTLX-10K-行動條碼QR Code

特製的張力計用於敏感材料如光纖電纜緩衝管,直徑可達8mm Ø

手持裝置超大引導輪(導槽直徑29.5mm)設計降低張力測量中材料的彎曲變形

張力計有特製的導輪和支架組便於穿線

 

性能特點:

1.    大型直徑29.5mmV型槽或U型槽導輪,配有滾珠軸承

2.    超大曲率半徑保證對被測敏感材料的保護性測量

3.    測量支架上的特殊引導設計保證測量材質輕鬆導入

4.    設計是依照DTMB,DTMX的款式,但沒有材料厚度補償器

 

其他資料請參照型號DTMB, DTMX

 

特性

l   一切盡收眼底

導向輪

測量材料

讀數

l   導線架和導向輪移動裝置確保運動材料易於導入

l   帶有球軸承的V型導向輪

l   防滑鋁外殼

l   電池供電

l   CE認證(電磁適應性試驗)

l   對電子放電所產生的衝擊和損害具有防護功能

l   可選:依照EN 10204規範的檢驗證明和校正報告

 

可選型號

型號

測量範圍(cN

解析度

測量頭寬度(mm

校正材料

DTLB-2000/DTLX-2000

200-2000

1 cN

185

Customer sample only

DTLB-5000/DTLX-5000

400-5000

1 cN

235

Customer sample only

DTLB-10K/ DTLX-10K

1-10daN

0.01 daN

235

Customer sample only

可選擇其他的測量單位,例如:g
測量頭的寬度為兩個引導輪的外沿間距

滿足95%的應用範圍PA=聚酰胺單絲

導向輪

V型槽

最大線速度m/min max

導輪材質

標準

4000

硬化鐵

No R10006

U型槽

代碼R1

4000

硬化鐵

radius R 5

 

配件

Code L 省力壓桿 建議張力範圍 10 daN及更大時選用以降低擴展外面導輪時所需施力

 

規格

 

精確度

 

其餘量程和不同於校正材料時

最佳量程(滿量程的10%-90%)的精度

±0.5%的滿量程或±1個刻度

±3%的滿量程或±1個刻度

過載量(約)

15%的滿量程,無精度保證

過載保護

100%

測量原理

應變測量電橋

測量輪偏差

最大0.2mm

信號處理

數字式

測量頻率

62/

轉換率

12位元 A/D

溫度補償

增益: 少於 ±0.01 % 滿量程/ºC
零點:少於 ±0.3 % 滿量程/ºC

顯示

4LCD12mm字高

刷新速度

0.5-1-24秒可選(平均)

範圍調整

1.5 % 增量的 ±7刻度

記憶

最後,最小,最大,峰值

溫度範圍

10-45

空氣濕度

最大相對濕度85%

電源

4*AA電池1.5伏特(大約可持續使用20小時)

外殼材料

模鑄鋁質

外殼尺寸

235*76*45mm(**)

淨重(毛重)

型號-10K 680g(1500g)

DTLX的額外規格

擴充的記憶體:

最多100 讀值,最大,最小,和峰值以及平均值和標準誤差

數位輸出信號:

RS 232 C (4800, 8, N, 2)

類比輸出信號:

0-1 V DC (轉換率 16 ms)

數位介面:

Mitutoyo

 


3 Tension ranges from 200 - 2000 cN to 1 - 10 daN

Special tension meter for sensitive materials as fibre optic cables and buffer tubes up to 8 mm Ø max.

Hand-held unit with large guide rollers (29.5 mm groove diameter) for minimized material deflection

Tension meter with special guides on the bracket assembly for easy thread

Special Features

  • Large, V- or U-grooved guide rollers with 29.5 mm groove diameter, ball-bearing mounted
  • Large bending radius assures gentle handling of the material being measured
  • Special guides on the bracket assembly permit easy material acquisition
  • The design is otherwise according to model DTMB respectively model DTMX, but no material thickness compensator

    For additional Information, see model DTMB and DTMX

Standard Features

  • Everything in operator`s view:
    - the guide rollers
    - the measured material
    - the readings
  • Filament guide and roller shifting mechanism ensures easy acquisition of the running material
  • V-grooved guide rollers, ball-bearing mounted
  • Tension meter with rugged aluminium housing
  • Certificate of Compliance with the order 2.1 according EN 10204 is included
  • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report

Available Models

Model

Model

Tension
Range
cN

Resolution

Measuring
Head Width*
mm

SCHMIDT
Calibration Material

DTLB-2000

DTLX-2000

200 - 2000

1 cN

185

customer sample only

DTLB-5000

DTLX-5000

400 - 5000

1 cN

235

customer sample only

DTLB-10K

DTLX-10K

1 - 10 daN

0.01 daN

235

customer sample only

 

Guide Rollers

Order-Code

Line Speed

 

...m/min

Roller Material

 

Standard

4000

hardened steel

Code R1

4000

hardened steel (radius R5)

 

Attachment

Code L


Special Lever

Specifications

Model DTLB:

Calibration:

According to SCHMIDT factory procedure

Accuracy:

From 10 % up to 90 % of tension range:
±0.5 % full scale and ±1 digit
remaining tension ranges and other calibration material:
±3 % full scale and ±1 digit

Overrange:

Approx. 15 % full scale, without accuracy guarantee

Overload protection:

100 % of tension range

Measuring principle:

Strain gauge bridge

Measuring roller deflection:

0.2 mm max.

Signal processing:

Digital

Measuring frequency:

62 Messungen/s

Converter:

12 bit A/D

Temperature coefficient:

Gain: less than ±0.01 % full scale/ºC
Zero point: less than ±0.3 % full scale/ºC

Display:

LCD 4 digit, 12 mm high

Display update time:

Adjustable 0.5, 1, 2 oder 4 s (averaging)

Field adjustment:

±7 steps in 1.5 % increment

Memory:

MIN, MAX, PEAK and last value

Temperature range:

10 - 45 ºC

Air humidity:

85 % RH, max.

Power supply:

4 Batteries 1.5 V, size AA (approx. 20 h continuous use)

Auto power off:

After 2 min of non-use

Housing material:

Die-cast aluminium

Housing dimensions:

235 x 76 x 45mm (LxWxH)

Weight, net (gross):

Approx. 680 g (approx. 1500 g)




Expanded memory:


Additonal specifications model DTLX:

Max. 100 readings, MAX, MIN, and PEAK as well as average values and standard deviation

Digital output signal:

RS 232 C (4800, 8, N, 2)

Analog output signal:

0 - 1 V DC (converter rate 16 ms)

Digimatic interface:

Mitutoyo

您也可能對以下商品有興趣...

產品關鍵字:

最新廠商動態!

KUBOTA離心機漲價說明
2019.11.07~11.11 9:30-17:00 2019台中自動化機械暨智慧製造展臺中國際展覽館(烏日區中山路3段1號),本公司於度量衡專區攤位559展出,歡迎各界先進蒞臨參觀指教!謝謝
Molecular Analysis 產品印度代理商
Whatman濾紙;Whatman定性濾紙;美國知名大廠;Whatman代理;濾膜;濾紙;過濾頭;歡迎洽詢
BROOKS;美國流量計知名品牌;質量流量控制器;BROOKS 5850E;流量計;

更多

最新儀器!

景興電腦科技有限公司--紅外線熱像儀系列(NEC F30)、影像工業內視

Copyright © 2006-2017 tw17 All rights reserved.
Design: 台灣儀器網

台灣儀器網Tw17 行動條碼QR Code