行動條碼QR Code
 |
|
| Vessel | Working volume (Liter) | 3L | 5L | 7L | 10L | 15L | 20L |
| Total volume (Liter) | 3.8 | 6.8 | 8.9 | 12.5 | 18 | 24.4 | |
| Material | Borosilicate glass / 316L stainless steel for headplate and all fittings | ||||||
| Control Unit | Control panel | 10.4" Colorful touch-screen interface | |||||
| Communication port | Remote control through Ethernet (SCADA) | ||||||
| Data export through USB port | |||||||
| RS-485 port for system extension | |||||||
| Program storage | Up to 59,994 process programs | ||||||
| Log data storage | Up to 10 process monitoring data files | ||||||
| Cabinet material | ABS front panel and painted iron housing | ||||||
| Dimension | Footprint: W400 x D500 mm (15.75" x 19.69") | ||||||
| Height = 740 mm (29.13") | |||||||
| Rated voltage | 110V or 220V ; 50/60 Hz | ||||||
| Aeration | Inlet gas flow-meter | 0, 1-10 LPM | 0, 2-20 LPM | 0, 4-50 LPM | |||
| Sparger | Orifice ring | ||||||
| Baffle | Removable 316L stainless steel baffles | ||||||
| Temperature | Heating | Heating blanket | |||||
| Cooling | Cooling coil | ||||||
| Range | 5°C (41°F) above coolant up to 60°C (140°F) | ||||||
| Resolution | 0.1°C | ||||||
| Probe | Platinum RTD probe (Pt 100) | ||||||
| Control mode | Programmable 15 steps PID control | ||||||
| Agitation | Drive | Removable top brushless motor | |||||
| Speed range | Two agitation motor types: | ||||||
| a. For fermentation and cell culture: 30 - 1,200 rpm | |||||||
| b. For shear-force sensitive cell culture line: 5 - 300 rpm (optional) | |||||||
| Resolution | 1 rpm | ||||||
| Impeller | Two impeller types: | ||||||
| a. For fermentation: 3 pcs of adjustable Rushton-type impeller | |||||||
| b. For shear-force sensitive cell culture: 2 pcs of adjustable Pitched-blade impeller (Optional) | |||||||
| Note: Customized impellers are available | |||||||
| Control mode | Programmable 15 steps PID control | ||||||
| pH | Range | 2 -14 pH | |||||
| Resolution | 0.01 pH | ||||||
| Probe | Gel-filled electrode: Autoclavable | ||||||
| Control mode | PID, One point control with adjustable dead band | ||||||
| DO | Range | 0 - 200% | |||||
| Resolution | 0.1% | ||||||
| Probe | Polarographic DO sensor; Autoclavable | ||||||
| Control mode | Cascade function to response to | ||||||
| a. Increase or decrease agitation speed | |||||||
| b. Oxygen enrichment module (optional) | |||||||
| c. Start substrate feeding program | |||||||
| ORP | Measurement range | -/+ 2000mV | |||||
| Resolution | 1 mV | ||||||
| Probe | Gel-filled electrode: Autoclavable (optional) | ||||||
| Foam | Probe | 316L stainless steel detector with insulated Teflon tube; | |||||
| On/Off control | |||||||
| Peristaltic pump | Pump number | 4 Built-in pumps; One external pump (optional, RS-485 interface with relay output) | |||||
| Motor type | Precise stepping motor; minimum speed is 1 rpm | ||||||
| Speed range | 0 - 65 rpm | ||||||
| Resolution | 1 rpm | ||||||
| Control mode | Programmable 15 steps feeding control; | ||||||
| Pump can be assigned for Acid, Base, Antifoam and Substrate | |||||||
| Exhaust | Device type | 316L stainless steel condenser | |||||
| Utility requirement | Power Supply | 100-120V 50/60Hz or 210-230V 50/60Hz with electrical safety cutoff switch | |||||
| Water | 2 Bar maximum (29 psi) | ||||||
| Air | 1 Bar maximum, must be dry, oil-free and filtered (14.5 psi) | ||||||
| Autoclave | For sterilization | ||||||
| Cat. No | Description |
| FS-02-B03P-110/220V | Complete Dry Heating Fermentation System for 3L Single Wall Dish Bottom Vessel, 110V/220V |
| FS-02-B05P-110/220V | Complete Dry Heating Fermentation System for 5L Single Wall Dish Bottom Vessel, 110V/220V |
| FS-02-B07P-110/220V | Complete Dry Heating Fermentation System for 7L Single Wall Dish Bottom Vessel, 110V/220V |
| FS-02-B10P-110/220V | Complete Dry Heating Fermentation System for 10L Single Wall Dish Bottom Vessel, 110V/220V |
| FS-02-B15P-110/220V | Complete Dry Heating Fermentation System for 15L Single Wall Dish Bottom Vessel, 110V/220V |
| FS-02-B20P-110/220V | Complete Dry Heating Fermentation System for 20L Single Wall Dish Bottom Vessel, 110V/220V |
| Dry Heating System with Sinle Wall Dish Bottom Vessel and Heating Blanket includes: | |
| Controller | Dry Heating System Controller |
| Built-in rotameter | |
| 4 x built-in pump head | |
| Vessel | Single wall dish bottom vessel with heating blanket (includes glass body, head plate, T handing bar, 2 probe adaptors) |
| 3 pcs of adjustable Rushton-type impeller | |
| Baffle assembly | |
| Condenser assembly | |
| Air sparger | |
| Motor | Agitation motor |
| Probes | 1 x pH probe and 1 x pH cable |
| 1 x DO probe and 1 x DO cable | |
| 1 x temperature probe and 1 x temperature cable | |
| 1 x foam/level sensor and 1 x foam/level sensor cable | |
| Start-up Kit | Includes 4 x 250 ml glass feeding bottles, 1 x 500ml glass feeding bottle, 10 x 45 mm 0.2 µm autoclavable disc type filters, 15 x connecting tubes, 20 x silicon tubing clamps, 25 ft of 1/8 inch (3.1 mm) silicon tube, 1 x handy burner, 1 x 2 mm hex wrench, and 1 x 12 mm & 14 mm double open-end wrench |
